Muromachi Bone Strength Tester
TK-252C/MK has been designed for the precise measurement of the bone strength of
the monkeys, however, it can be used for the rats and mice by replacing the sensors and sample holders.. It is a space-efficient desk top model that has not
ever commercially been available.
Main Features
1. Two types of tests------- 1)
Bending 2) Compressing of Lumber Vertebrae can be performed with the
standard system just by replacing sensors and sample holders.
2. The
information on the measurement can be entered by the keyboard of the Controller
and the test results will be graphically displayed on the screen of the
Controller and then printed out by the built-in rapid thermal
printer.
3. RS232C interface is provided on the rear panel of the
Controller so that the data obtained can be transfered to a personal computer.
Data Collection Software DCS-252C (Windows Version) is supplied with the
instrument as standards.
4. The operation is quite simple and so even
personnel not experienced in this test can use it with ease.
BTS-003MK
Bending Test Setup for Monkeys
LV-003MK Lumbar Vertebra Adaptor for Monkeys
SPECIFICATIONS
|
DETECTOR | |
| Load Cell | 5000N |
| Strain Gauge | 1500Ncm |
|
PRINTER | |
| Chart Paper |
Thermo-sensitive 58 mm W x 25 m L |
| Printer Outputs |
Date
(2005-10-30) |
|
DISPLAY | |
| CRT | Monochromatic with Brightness & Contrast Control |
| Screen Size | 9 Inch |
|
TESTER | |
| Dimensions | 180W x 165D x 460 mm H |
| Weight | Approx. 17 kg |
|
CONTROLLER | |
| Dimensions | 400W x 380D x 240 mm H |
| Weight | Approx. 13 kg |
| Power | AC 100V 50/60 Hz |
|
The Standard System Consists of: | |
| 1) Controller with built-in 9" display and printer | 1 |
| 2) Tester TK-252C/MK (for Monkey) | 1 |
| 3) Bending Test Setup BST-003MK(Sensor unit, Sample Stage, Adapter) | 1 |
| 4) Lumbar Vertebra Adapter (LV-003MK) | 1 |
| 5) Data Collection Software DCS-252C (Windows Version) | 1 |
| 6) RS232C Cable ( 1.5 m ) | 1 |
| 7) Chart Paper TSP-10 (58 mm Wide) | 1 |
|
OPTIONAL EXTRAS | |
| Lumbar Vertebra Compressing Adapter for Rats Weighting 350g and under | LV-001R |
| Lumbar Vertebra Compressing Adapter for Rats Weighting 350 - 450g | LV-002R |
| Torsion Test Sample Making Device for Rats | TSM-001R/SQ |
| Bending Test Sample Making Device for Rats | BSM-001R/RD |
| Femoral Neck Compressing Kit for Rats | FNK-001R |
| Tensile Test Setup for Rats | PTS-001R |
| Bending Test Setup for Mice | BTS-001M |
| Data Re-analysis Software | RAS-252C |
Femoral Neck Compressing Kit for Rats FNK-001R
|
|
|
Custom-made accessories are available upon request.
Specifications are subject to change without notice.
